Carnifex - Logo 3D Silicone/Fluid Multilevel - Aufnäher
Größe:Onesize
Instruction Manual for Applying a Textile Transfer Preparation:
- Use a standard iron. Choosing the surface: Place the fabric on a fire-resistant surface. An ironing board is less suitable; instead, use a wooden board, for example, from the kitchen.
- Position the transfer: Place the transfer design at the desired position on the fabric.
- Cover: Cover the transfer with parchment paper to protect it.
- Ironing (front side): Press the transfer for about one minute with moderate pressure on the front side. Ironing (back side): Repeat the process on the back side of the fabric.
- Cooling down: Let the fabric cool down lying flat.
- Check the edges: Check if all the edges of the transfer are adhering well. If necessary, press again on those areas.
- First wash: Wait at least 24 hours before washing the fabric for the first time.
Abteilung: Band Merch
Band: Carnifex
Subgenre: Death Metal, Deathcore
Produkttyp: Aufnäher
Material: 100% Silikon, Synthetik
Farbe: Schwarz
Maße (cm): 10x6
- zum aufbügeln